HomeViscosity ModifiersKIREI VI 5 HDL NF

KIREI VI 5 HDL NF

About this item

The viscosity modifier provides excellent viscosity-temperature performance combined with outstanding oxidative stability, ensuring superior lubricating properties and enhanced oil film thickness at high temperatures and shear rates. It is fully compatible with a wide range of synthetic and mineral base oils, including those used for the production of lubricants approved for incidental food contact under NSF H-1.

KEY TECHNICAL ADVANTAGES

  • Unmatched resistance to mechanical shear degradation

  • Suitable for the production of NSF H-1 food-grade lubricants

  • High thickening efficiency, reducing the required treat rate

  • Excellent compatibility with both mineral and synthetic base oils

 

 Specifications

 

KIREI VI 5 HDL NF can be used as a thickener for a wide range of industrial lubricants, both mineral and synthetic. Some examples include gear oils, transmission oils, hydraulic oils, engine oils, and circulating oils.

Chemical-physical properties
IndicatorTest MethodKIREI VI 5 HDL NF
Appearance Visual Clear, colorless oily liquid without impurities
Color ASTM D1500 0.5
Density at 20°C, g/cm³ ASTM D4052 0.845–0.865
Kinematic viscosity at 100°C, mm²/s ASTM D445 990–1210
Pour point, °C ASTM D5949 -15
Flash point (COC), °C ASTM D92 ≥290
SSI in KRL test after 20 hours, % CEC L-45-A-99 ≤5
Water content, ppm ASTM D6304 ≤30
Acid number, mg KOH/g ASTM D664 0.01
Bromine number, g/100g ASTM D1492 ≤0.15

 

The listed physical–chemical properties are typical for this product and may be changed by the manufacturer without prior notice; full compliance with product specifications is ensured.

Technical data valid as of 14 March 2025 and replaces all previous versions.

Specifications