KATANA Hariken 4000 VDL 46

About this item

KATANA Hariken 4000 VDL 46 – high performance ash-free semi-synthetic compressor oil for air compressors that require oils DIN 51506 p.3 (VDL)category. Fluid has excellent thermo-oxidative stability, increased drain interval, resistance to moisture in air (water / steam), prevents foaming, excessive oil carryover and the formation of coke-like deposits in the oil injection lines of compressors. Increased life time of compressor is ensured by the reduced component wear, corrosion protection and resistance to moisture.

Oil provides an outstanding equipment protection and extended service life of compressors, operating in the most demanding conditions. KATANA Hariken 4000 VDL 46 is used in oil-flooded or oil injected air compressors (single or multi-stage), installed on both fixed and mobile installations operating at temperatures up to 220 ° C. It is recommended for screw and vane compressors.

Chemical-physical properties

Parameter

Test method

Typical VDL 46 compressor fluid

Hariken

4000 VDL 46

Kinematic viscosity at 400С, cSt

ASTM D445

46

46

Kinematic viscosity at 1000С, cSt

ASTM D445

6.56

7.05

Viscosity index

ASTM D2270

90

110

TAN, mg КОН/g

ASTM D664

1

0.1

Copper corrosion at 1000С

ASTM D130

2a

1b

Flash point in open cup, 0С

ASTM D92

195

240

Oxidation stability, h

ASTMD943

1000

4000

Foaming/Foam stability

  • Sequence 1 (240С)
  • Sequence 2 (940С)
  • Sequence 3 (240С)

 

ASTM D892

 

50/0

50/0

50/0

 

0/0

10/0

0/0

Deemulsibility to40/37/3ml, min

ASTM D1401

25

5

Pour point, 0С

ASTM D97

-9

-32

Specifications
  • Application
    Compresor fluids
  • Setting point
    -32
  • Viscosity index
    110
  • Kinematic viscosity at 40С, cS
    46
TDS (Technical data sheet)