KIREI Slide CGLP 160
KIREI Slide CGLP 160 is a premium additive package for the production of mineral oils for vertical and horizontal slideways of class DIN 51502 (CGLP). Due to its special frictional characteristics, it prevents the "stick-slip effect." It provides high oxidation stability, excellent protection against corrosion and rust, outstanding anti-wear properties, and high compatibility (phase separation) with most water-miscible metalworking fluids. The typical treat rate of the package is 1.6%. To increase adhesion, the addition of KIREI PIB 1300 in a concentration of 1–1.2% is recommended.
Specifications
KIREI Slide CGLP 160 meets or is recommended as a replacement for oils conforming to DIN 51502 (CGLP), Cincinnati Milacron P47/P50, Schmidt (SKC) Inclined Tribotester.
|
Indicator | Test Method | KIREI Slide CGLP 160 |
|---|---|---|
| Appearance | Visual | Clear light-yellow liquid |
| Density at 20°C, g/ml | ASTM D1298 | 1.023 |
| Kinematic viscosity at 40°C, cSt | ASTM D445 | 83 |
| Flash point, open cup, °C | ASTM D92 | 90 |
| Sulfur content in oil (2% treat), ppm | ASTM D5185 | 4000 |
| Phosphorus content in oil (1.6% treat), ppm | ASTM D5185 | 244 |
| Acid number in oil (1.6% treat), mg KOH/g | IP 177 | 0.6 |
| Demulsibility at 54°C (ISO VG 68), min | ASTM D1401 | 13 |
| Copper corrosion, 3 h at 100°C | ASTM D130 | 1a |
| Steel corrosion | ASTM D655 | Pass |
| Static coefficient of friction (ISO VG 68) - Cast iron on cast iron - Plastic on plastic |
Schmidt incline tribotester |
0.140 / 0.141 |
| Weld load in Four-Ball test (ISO VG 68), kg | ASTM D2783 | 200 |
| Wear scar diameter in Four-Ball test at 20 kg and 1800 rpm (ISO VG 68), mm | ASTM D2266 | 0.29 |
| Load-carrying capacity in FZG test | FZG A/8.3/90 | 12 |
(These physical–chemical characteristics are typical for this product and may be modified by the manufacturer without prior notice; however, full compliance with the specifications is ensured.)