HomeIndustrial Additive PackagesKIREI Compressor L-DAJ 080

KIREI Compressor L-DAJ 080

About this item

KIREI Compressor L-DAJ 080 is a premium ashless additive package for the production of mineral and synthetic compressor oils of the L-DAJ class according to ISO 6743-3 and DIN 51506 (VDL), operated at high temperatures (up to 220°C) and with extended drain intervals. It is used for the production of oils for reciprocating, screw, and vane compressors. The package contains highly effective antioxidants, demulsifying, anticorrosion, and antiwear EP (Extreme Pressure) components. Thanks to excellent thermo-oxidative stability, it prevents deposit formation, ensures long oil service life (up to 12,000 hours), and has high demulsifying properties. It reduces wear, minimizes the formation of deposits and sludge. Compatible with Group I, II, III, and IV base oils. Provides high oxidative stability in the TOST and RPVOT tests. Typical treat rate: 0.4–0.8%.

 

Specifications

KIREI Compressor L-DAJ 080 complies with or is recommended as a replacement for oils ISO 6743-3 (L-DAA/DAB/DAC/DAG/DAH/DAJ), DIN 51506 (VDL).

Chemical-physical properties

Indicator

Test MethodKIREI Compressor L-DAJ 080
Appearance

Visual

Light yellow transparent liquid
Density at 15°C, g/ml

ASTM D1298

1.002
Kinematic viscosity at 100°C, cSt

ASTM D445

12.2
Acid number in oil (treat 0.8%), mg KOH/g ASTM D664 0.08

Oxidation stability TOST (treat 0.8%), h

  • Group IV (PAO) (0.8%)
  • Group III+AN (0.8%)
  • Group II (0.8%)
  • Group II (0.4%)
 ASTM D943

 

>12000

>10000

>10000

>4000

Oxidation induction period RPVOT, min

  • Group IV (PAO) (0.8%)
  • Group III+AN (0.8%)
  • Group II (0.8%)
  • Group II (0.4%)
 ASTM D2272

 

>2500

>2000

>2000

>1000
Corrosion resistance (Group IV, treat 0.8%), h ASTM D665B Pass
Copper corrosion for 3 h at 100°C (Group IV, treat 0.8%), h ASTM D130 1

Foaming tendency/stability (treat 0.7% and 40 ppm AF), ml

  • Seq. I 24°C
  • Seq. II 94°C
  • Seq. III 24°C
 ASTM D892

 

0/0

10/0

0/0
Demulsibility (Group IV, treat 0.8%) at 54°C, min ASTM D1401 8
Air release time (Group IV, treat 0.8%) at 50°C, min ASTM D3427 5

 

The specified physico-chemical characteristics are typical for this product. These characteristics may be changed by the manufacturer without prior notice; however, full compliance of the product with the specifications is guaranteed.

Specifications